Plug valve (lubricated)

Short-pattern lubricated taper plug valve with a tall cast plug chamber, bolted top cover and gland, bottom cover with adjusting screw, stop lugs, sealant (lubricant) fitting on the stem, flow arrow and nameplate. Square-head wrench up to NPS 6 and a worm gear above; open turns the wrench or indicator a quarter turn.

Installation

Copies valves/plug-valve.tsx and the shared lib/ into src/components/deck-twin/. Needs three, @react-three/fiber and @react-three/drei. See installation for the manual route.

Usage

import { Canvas } from '@react-three/fiber'
import { OrbitControls } from '@react-three/drei'
import { Stage } from './components/deck-twin/lib/stage'
import { PlugValve } from './components/deck-twin/valves/plug-valve'

export default function Scene() {
  return (
    <Canvas shadows camera={{ position: [8, 5, 9], fov: 35 }}>
      <Stage>
        <PlugValve />
      </Stage>
      <OrbitControls makeDefault />
    </Canvas>
  )
}

Props

P&ID

Bow-tie with a small rectangle (the plug) at the centre where the triangles meet; manual plug valves show a wrench or T on the stem.

tag HVISO 10628-2 / ISO 14617-8 / PIP PIC001

Legends vary: some draw a plug valve as a bow-tie with a filled triangle-in-circle, others as a ball valve with "P" or "PLUG". Check the legend; the valve code in the line class confirms it.

Plug valve datasheet (API 599 / API 6D) fields and the props they set

Sizenps

Pressure classrating

Operatoroperator

Tag numbertag

Typical suppliers

Flowserve Nordstrom. The geometry is generic and sized from public standards. It is not vendor CAD.

For agents

Machine-readable entry with props, ranges, defaults and ports:

Or fetch /r/plug-valve.json, or copy a ready-made instruction:

Add the Deck Twin "Plug valve (lubricated)" component to this project. Run `npx -y https://decktwin.com/cli/deck-twin-0.2.2.tgz add plug-valve` (it copies the file and the shared lib into src/components/deck-twin/), then `npx -y https://decktwin.com/cli/deck-twin-0.2.2.tgz info plug-valve` for its props, ranges and ports. Render <PlugValve /> inside a React Three Fiber <Canvas shadows>, wrapped in <Stage> from src/components/deck-twin/lib/stage. Set props from my data (metres, NPS in inches, ASME class) and leave the rest at defaults. Install three, @react-three/fiber, @react-three/drei and @types/three if they're missing. Full guide: https://decktwin.com/skill/SKILL.md