Drilling mud pump

Horizontal single-acting triplex (or 4–6 cylinder) mud pump on an oilfield skid, sized on a 14" stroke, 2200 hp class unit: 5.5 m over skids, discharge centreline 1.25 m, 10" class 150 suction manifold, 5" 10K discharge through a strainer cross. Forged fluid-end modules with hammer-lug valve and cylinder-head covers, liner retainers, pony rods that stroke when running, liner-wash header and drip pan. Bladder pulsation dampener and reset relief valve on the cross, two top-mounted AC motors driving each end of the pinion shaft by banded V-belts behind mesh guards or by enclosed gear cases (drive).

Installation

Copies drilling/mud-pump.tsx and the shared lib/ into src/components/deck-twin/. Needs three, @react-three/fiber and @react-three/drei. See installation for the manual route.

Usage

import { Canvas } from '@react-three/fiber'
import { OrbitControls } from '@react-three/drei'
import { Stage } from './components/deck-twin/lib/stage'
import { MudPump } from './components/deck-twin/drilling/mud-pump'

export default function Scene() {
  return (
    <Canvas shadows camera={{ position: [8, 5, 9], fov: 35 }}>
      <Stage>
        <MudPump />
      </Stage>
      <OrbitControls makeDefault />
    </Canvas>
  )
}

Props

P&ID

Reciprocating pump symbol (circle with a piston and crank) on the mud system flow sheet, with a pulsation dampener (small dome) on the discharge going to the standpipe manifold and suction from the mud tanks; usually two or three pumps in parallel.

tag MPtag PISO 10628-2 / PIP PIC001 (reciprocating pump) / API 7K mud system

The dampener dome and the mud / standpipe service distinguish it from a process plunger pump (reciprocating-pump). Only on drilling flow sheets.

Mud pump datasheet (API 7K) fields and the props they set

Number of cylinderscylinders

Input powerkw

Drive typedrive

Suction sizesuctionNps

Discharge sizedischargeNps

Tag numbertag

Typical suppliers

NOV · HMH · Bentec. The geometry is generic and sized from public standards. It is not vendor CAD.

For agents

Machine-readable entry with props, ranges, defaults and ports:

Or fetch /r/mud-pump.json, or copy a ready-made instruction:

Add the Deck Twin "Drilling mud pump" component to this project. Run `npx -y https://decktwin.com/cli/deck-twin-0.2.2.tgz add mud-pump` (it copies the file and the shared lib into src/components/deck-twin/), then `npx -y https://decktwin.com/cli/deck-twin-0.2.2.tgz info mud-pump` for its props, ranges and ports. Render <MudPump /> inside a React Three Fiber <Canvas shadows>, wrapped in <Stage> from src/components/deck-twin/lib/stage. Set props from my data (metres, NPS in inches, ASME class) and leave the rest at defaults. Install three, @react-three/fiber, @react-three/drei and @types/three if they're missing. Full guide: https://decktwin.com/skill/SKILL.md