Plunger pump (API 674 triplex)
Horizontal single-acting plunger pump package on a structural skid: ribbed power frame with inspection covers, crosshead extensions under mesh guards, packed stuffing boxes, forged fluid end with plunger-bore and valve covers, suction and discharge manifolds with a suction stabiliser and a bladder pulsation dampener, relief valve back to suction, parallel-shaft gear reducer, guarded coupling and IEC motor. plungers gives a triplex or quintuplex; kW sizes the frame.
Installation
Copies rotating/reciprocating-pump.tsx and the shared lib/ into src/components/deck-twin/. Needs three, @react-three/fiber and @react-three/drei. See installation for the manual route.
Usage
import { Canvas } from '@react-three/fiber'
import { OrbitControls } from '@react-three/drei'
import { Stage } from './components/deck-twin/lib/stage'
import { ReciprocatingPump } from './components/deck-twin/rotating/reciprocating-pump'
export default function Scene() {
return (
<Canvas shadows camera={{ position: [8, 5, 9], fov: 35 }}>
<Stage>
<ReciprocatingPump />
</Stage>
<OrbitControls makeDefault />
</Canvas>
)
}
Props
| Prop | Type | Default | Range |
|---|---|---|---|
plungers | 3 | 5 | null | |
kw | number (kW) | null | 15 – 1500 |
suctionNps | number (NPS, in) | null | |
dischargeNps | number (NPS, in) | null | |
suctionRating | 150 | 300 | 600 | 900 | 1500 | 2500 | null | |
rating | 150 | 300 | 600 | 900 | 1500 | 2500 | null | |
running | boolean | null | |
tag | string | null | |
...group | position, rotation, scale… |
P&ID
Pump circle with a piston (a short thick bar) and rod inside, the rod leaving to a crank; suction in at the bottom and discharge out at the top, often with pulsation dampeners drawn as small domes on both lines.
A piston, plunger or crank inside the circle marks positive displacement. An adjustable-stroke arrow through it means a metering pump. Legends vary: some use a rectangle with a piston instead of a circle.
plungerskwsuctionNpsdischargeNpssuctionRatingratingtagTypical suppliers
Aldrich (Pleuger). The geometry is generic and sized from public standards. It is not vendor CAD.
For agents
Machine-readable entry with props, ranges, defaults and ports:
Or fetch /r/reciprocating-pump.json, or copy a ready-made instruction:
Add the Deck Twin "Plunger pump (API 674 triplex)" component to this project. Run `npx -y https://decktwin.com/cli/deck-twin-0.2.2.tgz add reciprocating-pump` (it copies the file and the shared lib into src/components/deck-twin/), then `npx -y https://decktwin.com/cli/deck-twin-0.2.2.tgz info reciprocating-pump` for its props, ranges and ports. Render <ReciprocatingPump /> inside a React Three Fiber <Canvas shadows>, wrapped in <Stage> from src/components/deck-twin/lib/stage. Set props from my data (metres, NPS in inches, ASME class) and leave the rest at defaults. Install three, @react-three/fiber, @react-three/drei and @types/three if they're missing. Full guide: https://decktwin.com/skill/SKILL.md