Breathing apparatus cabinet

GRP storage cabinet for self-contained breathing apparatus, hollow with a gel-coat lining, moulded front flange, door seal, left-hand piano hinge, toggle latches and pull handle; the door carries a blue mandatory respiratory-protection sign and the tag. open swings the door to show the SCBA set: composite cylinder strapped to the backplate (valve down), harness and waist belt, pressure reducer, gauge hose and gauge, full-face mask with visor and demand valve. sets 2 widens it for a spare cylinder in a cradle. On wall cleats or a galvanised stand. Sizes follow typical single-set (≈548 × 816 × 344 mm) and set-plus-spare (≈835 × 937 × 347 mm) cabinets.

Installation

Copies safety/breathing-apparatus-cabinet.tsx and the shared lib/ into src/components/deck-twin/. Needs three, @react-three/fiber and @react-three/drei. See installation for the manual route.

Usage

import { Canvas } from '@react-three/fiber'
import { OrbitControls } from '@react-three/drei'
import { Stage } from './components/deck-twin/lib/stage'
import { BreathingApparatusCabinet } from './components/deck-twin/safety/breathing-apparatus-cabinet'

export default function Scene() {
  return (
    <Canvas shadows camera={{ position: [8, 5, 9], fov: 35 }}>
      <Stage>
        <BreathingApparatusCabinet />
      </Stage>
      <OrbitControls makeDefault />
    </Canvas>
  )
}

Props

P&ID

Safety equipment layouts: a cabinet rectangle with a BA mark or a cylinder outline, located at muster points, the CCR and H2S-risk areas, with the number of sets noted.

tag BAtag SCBASafety equipment layout convention; ISO 7010 sign

Only on safety equipment plans. A cabinet with a cross is a first-aid station; a cabinet with FE is an extinguisher.

Safety equipment schedule (EN 137 / SOLAS FSS Code ch. 3) fields and the props they set

Number of setssets

Mountingmount

Colourcolour

ISO 7010 signsign

Tag numbertag

Typical suppliers

Survitec · Viking Life-Saving Equipment. The geometry is generic and sized from public standards. It is not vendor CAD.

For agents

Machine-readable entry with props, ranges, defaults and ports:

Or fetch /r/breathing-apparatus-cabinet.json, or copy a ready-made instruction:

Add the Deck Twin "Breathing apparatus cabinet" component to this project. Run `npx -y https://decktwin.com/cli/deck-twin-0.2.2.tgz add breathing-apparatus-cabinet` (it copies the file and the shared lib into src/components/deck-twin/), then `npx -y https://decktwin.com/cli/deck-twin-0.2.2.tgz info breathing-apparatus-cabinet` for its props, ranges and ports. Render <BreathingApparatusCabinet /> inside a React Three Fiber <Canvas shadows>, wrapped in <Stage> from src/components/deck-twin/lib/stage. Set props from my data (metres, NPS in inches, ASME class) and leave the rest at defaults. Install three, @react-three/fiber, @react-three/drei and @types/three if they're missing. Full guide: https://decktwin.com/skill/SKILL.md