Escape route and muster sign

Escape-route signage to ISO 7010: emergency exit E001 (left hand) or E002 (right hand) with a supplementary direction arrow, or evacuation assembly point E007 (square, larger), each over a legend band. lighting internal gives an aluminium Ex sign box with a lit polycarbonate face, status LED, gland and cable; photoluminescent gives a riveted 2 mm aluminium plate with a glow-in-the-dark face. On a galvanised post or wall rails, with tag bracket.

Installation

Copies safety/escape-sign.tsx and the shared lib/ into src/components/deck-twin/. Needs three, @react-three/fiber and @react-three/drei. See installation for the manual route.

Usage

import { Canvas } from '@react-three/fiber'
import { OrbitControls } from '@react-three/drei'
import { Stage } from './components/deck-twin/lib/stage'
import { EscapeSign } from './components/deck-twin/safety/escape-sign'

export default function Scene() {
  return (
    <Canvas shadows camera={{ position: [8, 5, 9], fov: 35 }}>
      <Stage>
        <EscapeSign />
      </Stage>
      <OrbitControls makeDefault />
    </Canvas>
  )
}

Props

P&ID

On escape route plans: a small sign rectangle showing the ISO 7010 emergency exit or assembly point symbol with a direction arrow, at each change of direction along the escape route; route arrows drawn along the walkways.

ISO 7010 / ISO 3864-1 (safety signs), escape plan convention

Only on escape and safety plans. Muster / assembly points use the square E007-type sign; exits use the rectangular sign with an arrow.

Safety sign schedule (ISO 7010, ISO 3864-1, ISO 16069) fields and the props they set

Sign symbolsymbol

Direction arrowarrow

Lightinglighting

Mountingmount

Mounting heightheight

Legendlegend

Tag numbertag

Typical suppliers

Eaton (CEAG) · Hazatex · DENIOS. The geometry is generic and sized from public standards. It is not vendor CAD.

For agents

Machine-readable entry with props, ranges, defaults and ports:

Or fetch /r/escape-sign.json, or copy a ready-made instruction:

Add the Deck Twin "Escape route and muster sign" component to this project. Run `npx -y https://decktwin.com/cli/deck-twin-0.2.2.tgz add escape-sign` (it copies the file and the shared lib into src/components/deck-twin/), then `npx -y https://decktwin.com/cli/deck-twin-0.2.2.tgz info escape-sign` for its props, ranges and ports. Render <EscapeSign /> inside a React Three Fiber <Canvas shadows>, wrapped in <Stage> from src/components/deck-twin/lib/stage. Set props from my data (metres, NPS in inches, ASME class) and leave the rest at defaults. Install three, @react-three/fiber, @react-three/drei and @types/three if they're missing. Full guide: https://decktwin.com/skill/SKILL.md